Jack & Control Plates

Frankie - Bass Tech Will these Jack & Control Plates work with your Bass? Ask Frankie, our Bass Tech.

Frequently Asked Questions

Question: Where Can I Buy Jack & Control Plates?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at [email protected] or chatting with our Bass Techs

Shop By Filter
  1. Richter JB-VBT Passive Control Plate with Solderless connections

    $79.95
    JB plate replacement for Jazz bass with Volume, Blend, Tone, with solderless connections
    Richter JB-VBT Preamp - JB plate replacement for Jazz bass The RICHTER JB PASSIVE control plate is an easy mounting component for passive bass guitars like the Jazz Bass TM. It provides a volume pot, an MN taper balance pot and one tone control...
  2. Lusithand NFP Jazz Control Plate (Volume - Volume)

    $209.00
    Volume-Volume configuration, solderless, fits most Jazz Basses without modifications.
    Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...
  3. Lusithand NFP Double Jazz Control Plate (Volume - Volume) (updated)

    Regular Price: $289.00

    Special Price $269.00

    Lusithand NFP Double Jazz Control Plate
    Lusithand NFP Double Jazz Control Plate This is a direct replacement plate that will fit most Jazz basses. It's solderless and very easy to install, no need for opening holes for batteries as a single 9v sits perfectly in the cavity. The...
  4. Lusithand 800TS Jazz Bass Control Plate (Volume - Blend)

    Regular Price: $269.00

    Special Price $229.00

    800TS Jazzplate
    800TS Jazzplate A tibute to the GK800RB amplifier served on a Jazzplate with active/passive switching. Get that signature sound, straight out of your bass. Make it growl, make it deep, make it clear. It’s all there!! Acive...
  5. Lusithand NFP Jazz Control Plate (Volume - Blend) (updated)

    $219.00
    Volume-Blend configuration, solderless, fits most Jazz Basses without modifications.
    Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...
  6. Lusithand 800JP Jazz Bass Control Plate (Volume - Blend)

    $299.00
    A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
    800JP Jazzplate (Volume-Blend) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...
  7. Lusithand 800JP Jazz Bass Control Plate (Volume - Volume)

    $289.00
    A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
    800JP Jazzplate (Volume-Volume) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...
  8. Pure Tone Stereo Output Jack

    $5.20 - $7.99
    *Stereo version for instruments with stereo outputs or active electronics*
    Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...
  9. Pure Tone Mono Output Jack

    $4.20 - $7.99
    Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...
  10. Pure Tone Mono/Stereo 1/4in. Barrel Jack Nickel

    $9.99
    Long-threaded jack for mono ?and? stereo applications Nickel
    Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...
  11. NOLL 9 lug Stereo Jack

    $14.00 - $20.00
    NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...
  12. ElectroSocket

    $8.70
    ElectroSocket Jackplate in Chrome, Black, and Gold
    Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...
  13. Jazz Control Plate

    $24.20 - $26.40
    Jazz Bass Control Plate in Chrome, Black, or Gold
    These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...
  14. Jack - Switchcraft Stereo Long Threaded Jack

    $18.98 - $23.00
    Long Threaded Barrel Input Jack
    Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".
  15. Football Jack Plate

    $8.40
    Metal "football" jack plate for Guitar & Bass
    Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.
  16. Jack - Switchcraft Stereo Output Jack

    $6.83
    1/4 Output Jack
    1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...
  17. Cruz Tools GrooveTech Jack and Pot Wrench

    $16.95
    The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
    Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...
  18. American Vintage 62 Jazz Bass 3-hole control plate

    $34.99
    3-Hole Jazz Bass Control Plate
    Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.
  19. Switchcraft Mono Jack

    $6.04
    Switchcraft #11 1/4" Mono Input Jack
    1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Frequently Asked Questions

Question: Where Can I Buy Jack & Control Plates?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at [email protected] or chatting with our Bass Techs

Shop By Filter