One 8" Piece typically adequate for 2 Jazz Style Pickups.
Wondering how to use this? Check out this article on setting your pickup height using foam >>
Perfect product for retro fit.
By Martti Lehtonen from on 1/15/2014
If you've ever tried to line up four pickup screws with springs on them, (and who hasn't?) then this is a million times easier. Just peel and stick in pickup cavity, tada! Never use springs again.
By chris smith from on 1/15/2014
By gaetan harton from on 1/15/2014
Easy to cut and install and good quality. I had pickups that were mounted with springs the springs were getting worn out this solved the foam solved the problem. I would highly recommend the product.
By michael from on 1/15/2014
Worked perfectly, but I neglected to measure my bass cavity first. These were much longer than I anticipated.
Longer than I thought too
By Bill from on 1/15/2014
Simple and easy to use--what could be better?
By Bill Wilkat from on 1/15/2014
Length of 3 Jazz pickups.
Longer than I thought
By William Sandoval from on 1/15/2014
Great price, reasonable shipping, and the foam worked perfectly. My bass is now finished!
Exactly what I needed
By Zach from on 1/15/2014
I used this foam on my Warmoth G5 build, using two pieces for each pickup, pickups are soapbar Barts. Couldn't have been any easier to use - just cut to length and stick it down.
Simple and effective
By Darren Hills from on 1/15/2014
Great value for custom bass builders!